Before you use this sheet

This is a free record template from TradieRoles, provided by FTC Group Pty Ltd. It helps you capture test results, it does not certify them.

← All tools TradieRoles

VerifyIQ

VerifyIQ

Electrical Certificate of Test · verification to AS/NZS 3000:2018 Section 8 · tested per AS/NZS 3017:2022
Electrical Certificate of Compliance · record of inspection & test to AS/NZS 3000 & AS/NZS 3017 · EWRB regime
AU · AS/NZS
1Visual inspection — AS/NZS 3000 Cl 8.2.2
2Mandatory tests — AS/NZS 3000 Cl 8.3.3
Ckt Description Earth cont. (Ω) Insul. res. (MΩ) Polarity Ckt conn. EFLI Zs (Ω) RCD (mA / ms) Result
3Test instruments used
Instrument (make / model)Serial no.Calibration due
4Result & declaration
I certify the electrical installation described has been tested in accordance with AS/NZS 3000:2018 and the results recorded above are a true record. A Certificate of Electrical Safety / Compliance is to be issued as required by the relevant State or Territory regulator.
I certify that the prescribed electrical work has been done lawfully and safely and complies with AS/NZS 3000, and that a Certificate of Compliance (and Record of Inspection where required) will be issued and supplied under the Electricity (Safety) Regulations 2010.
Free record template · TradieRoles Tools · © FTC Group Pty Ltd (ABN 70 694 989 994). Provided as-is with no warranty. Testing, pass/fail limits and certification remain the responsibility of the licensed person completing this sheet. Verify against the current edition of AS/NZS 3000 and AS/NZS 3017.