← All tools
VOLTIQ
FREE TOOL · TRADIEROLES.COM
Voltage drop0.00%
Volts dropped0.0 V
Limit5.0 %
Status

Circuit — voltage drop

The tool does not supply current ratings. Enter the tabulated CCC for your cable and installation method from AS/NZS 3008 or the manufacturer datasheet, and the applicable derating factors.
Route length is the cable run one way — the calc doubles it for single phase and DC. Set the limit to your budget for this run (AS/NZS 3000 allows 5% total from point of supply; a common split is 2% sub-mains + 3% final subcircuit).
Compliance note: VoltIQ calculates voltage drop from conductor physics (IEC 60228 resistances, temperature corrected). It does not check current-carrying capacity or derating — verify cable selection against AS/NZS 3008 tables and AS/NZS 3000 before installation. Electrical work must be carried out by a licensed electrician.

All sizes at this load